2 POINTS
Male Pipe (NPTF - 30 Cone Seat) (MegaCrimp)
#GATG25100-0402
Product Overview
Gates MegaCrimp Couplings are Designed for use w/ Gates Wire Braid Hydraulic Hose to Create a Robust, Leak-Free Assembly. The Pre-Assembled Coupling is Designed w/ a Patented C Insert Attached to the Ferrule.
Features & Benefits
- Surpassed one million impulse cycles during design testing.
- MegaCrimp couplings set a new standard for hydraulic couplings. The unique "C" insert ensures "weep-free" concentric crimping to keep equipment and the environment clean.
- One of the most common causes of hydraulic leaks is a cracked coupling nut or seat due to over-torquing by a strong-armed worker. Gates has engineered a solution – Full-Torque Nut technology now available on Gates MegaCrimp and GlobalSpiral couplings.
- Robust Bite-the-Wire Crimp. Low Profile. Full-Stem Insertion. Full-Length Crimp. Tested to Industry-Leading 600,000 Impulse Cycles.
- Simplifies Inventory Management. Environmentally-Friendly TuffCoat Plating for 345 Percent Better Corrosion Resistance than SAE Standard.
- One MegaCrimp Coupling Size can Accommodate Various 1 and 2 Wire Braid Hydraulic Hoses of Different Constructions & Wall Thicknesses, Simplifying Inventory Requirements, Helping to Reduce Costs & Simplifying Coupling Selection.
Specifications
| Angle | 0 deg |
| Coupling Description | MegaCrimp Male Pipe (NPTF - 30 Cone Seat) |
| Customer Pack | 5 |
| Cut Off (in) – C | 15/16 in (2.39 cm) |
| Cut Off (mm) – C | 23.9 |
| Thread Size | 1/8-27 |
| Fitting Type | Male |
| Hose I.D. (mm) | 6.4 |
| Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose |
| Industrial Description | 4G-2MP |
| Inside Diameter | 1/4 in (0.64 cm) |
| Length | 1-61/64 in (4.97 cm) |
| Length (in) – L | 1.96 |
| Length (mm) – L | 49.8 |
| Product Number | 710010025 |
| Stem Hex (in) – H1 | 1/2 |
| Type | MegaCrimp Male Pipe (NPTF - 30 deg Cone Seat) |
| Weight | 0.11 lb (0.05 kg) |
