A/Trsax Output Shaft Speedi-Sleeve - Left
#SKF99118
Product Overview
Our Speedi Sleeves Repair Scored to Restored in a Few Minutes With a Few Easy Steps With No Special Tooling.
Features & Benefits
Features & Benefits
SKF99118 - Features Documents - A
SKF99118 - Features Documents - B
SKF99118 - Features Documents - C
SKF99118 - Features Documents - D
SKF99118 - Features Documents - E
- Although Installation is Simple, it Should be Done Carefully to Achieve the Best Results.
- Before Starting, the Sealing Zone of the Shaft Should be Carefully Cleaned and Any Burrs or Rough Spots Should be Filed Down and Polished.
- Deep Wear Grooves, Scratches or Very Rough Surfaces Should be Treated With a Suitable Powdered Metal Epoxy Filler.
- The Sleeve Must be Positioned on the Shaft Before the Filler Has Hardened.
- It Should Also be Noted that Although Speedi Sleeves Can be Easily Installed Within Minutes on Most Shafts.
- They Should NOT Be Placed Over Splines or Keyways, etc on the Shaft.
- Commonly Used on End Yokes, Input/Output Shafts, Crankshafts, Camshafts, Accessory Drive Shafts, or Wherever Needed to Alleviate Additional Costs and Downtime.
- A Mallet or Rubber Hammer is Commonly Used to Drive the Sleeve on the Shaft With an Enclosed Driver Tool.
- Instructions Included With Most All of Our Speedi Sleeves.
- Manufactured to Meet or Exceed O.E.M. Specifications in Function, Form & Fit.
Specifications
| Compatible avec le diamètre de l'arbre | 1.185 in. To 1.190 in. / 30.10 mm To 30.23 mm |
| Diamètre de bride | 1-9/64 in (2.9 cm) |
| Épaisseur | 5/16 in (0.79 cm) |
Interchanges & Equivalent parts:
| 145899118 |
| CR99118 |
| 965899118 |
| 99118 |
| 991181 |
| 99118CHR |
| 99118RS |
| CHR99118 |
| N99118 |
| NN99118 |
| ZAR99118 |
| 4134132100 |
| 27SR4132 |