Female Komatsu Style Japanese Metric Swivel - 45 Bent Tube (MegaCrimp)
#GATG25911-1010
Product Overview
Gates MegaCrimp Couplings are Designed for use w/ Gates Wire Braid Hydraulic Hose to Create a Robust, Leak-Free Assembly. The Pre-Assembled Coupling is Designed w/ a Patented C Insert Attached to the Ferrule.
Features & Benefits
- These Female Swivels Have Been Marked w/ 2 Small Notches on the Hex to Identify Them as the Komatsu Style.
- This Design Ensures that Crimping Forces are Evenly Distributed to Form a Concentric, Leak-Free Seal.
- Robust Bite-the-Wire Crimp. Low Profile. Full-Stem Insertion. Full-Length Crimp. Tested to Industry-Leading 600,000 Impulse Cycles.
- Simplifies Inventory Management. Environmentally-Friendly TuffCoat Plating for 345 Percent Better Corrosion Resistance than SAE Standard.
- One MegaCrimp Coupling Size can Accommodate Various 1 and 2 Wire Braid Hydraulic Hoses of Different Constructions & Wall Thicknesses, Simplifying Inventory Requirements, Helping to Reduce Costs & Simplifying Coupling Selection.
Specifications
Angle | 45 deg |
Coupling Description | MegaCrimp Female Komatsu Style Japanese Metric Swivel - 45 Bent Tube |
Cut Off (in) – C | 3-7/32 in (8.18 cm) |
Cut Off (mm) – C | 81.8 mm |
Drop (in) – T | 1.1 |
Drop (mm) – T | 28 mm |
Thread Size | M24X1.5 |
Fitting Type | Female |
Hose I.D. (mm) | 15.9 mm |
Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose |
Industrial Description | 10G-10FKX45 |
Inside Diameter | 5/8 in (1.6 cm) |
Length | 4-45/64 in (11.95 cm) |
Length (in) – L | 4.7 |
Length (mm) – L | 119.3 mm |
Nut Hex (in) – H2 | 1-17/64 in (3.23 cm) |
Nut Hex (mm) – H2 | 32 mm |
Thread | M24 x 1.5 |
Thread Type | Metric |
Type | MegaCrimp Female Komatsu Style Japanese Metric Swivel - 45 deg Bent Tube |