2 POINTS
Tuyau hydraulique, Lo: 50 pi, DI: 1/2 in
#GAT86609
Sommaire du produit
Recommended for medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, and filtration lines.
Caractéristiques et avantages
- Federal Law Requires Registration w/ the Department of Transportation for anyone producing air brake hose assemblies w/ swaged or crimped fittings.
- Recommended couplings include C5 and C5X field attachable couplings (for sizes -5, -8, and -12), as well as MegaCrimp™ and GlobalSpiral™ couplings (depending on size). Please see Gates® eCrimp for correct fitting recommendations.
- Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications and DOT FMVSS 106-74 Type AII / SAE J1402 Type AII for air brake applications (sizes -4 to -12).
- Not Recommended for Gasoline or Diesel Fuel.
- Avoid continuous use at maximum temperature concurrent with maximum working pressures.
Spécifications
| Application | Medium Pressure Hydraulic Petroleum-Based Oil Lines in Impulse Applications |
| Pression d'éclatement | 7000 psi |
| Couleur | Black |
| Recommandation d'accouplement | C5 Field Attachable |
| Matériau du couvercle | Black Polyester Braid |
| Type de housse | Oil & Mildew Resistant |
| Dash Size | 10 |
| DOT approuvé | Yes |
| Matériau du tube intérieur du tuyau | Nitrile |
| Description industrielle | 10C5CX50FT |
| Diamètre intérieur | 0.5 in |
| Longueur | 50 ft |
| Diamètre extérieur | 0.92 in |
| Type de produit | C5C Hydraulic Hose - SAE 100R5 |
| Renforcement | One Braid of High-Tensile Carbon Steel Wire Over One Braid of Polyester |
| Séries d'embouts de tuyau utilisés | Permanent Crimp And "Field Attachable C5 in Series Fittings |
| Plage de température | -40 to 212 °F |
| Tuyau - Description | Black, Oil & Heat Resistant Synthetic Rubber |
| Type | Medium Pressure |
| CUP | 72053341829 |
| Poids | 18.85 lbs |
| Pression de service | 1750 psi |
| Rayon de courbure | 5.5 in |
| Type de renforcement | 2-Braid, Textile, Wire |
| Standards | SAE 100R5, SAE J1402 All |
| Numéro de référence de fabricant | 86609 |
| Catégorie de produit | Hydraulic Hose |
| Quantité | 1 |
Interchanges et pièces équivalentes:
| GR510X50 |
| GR510X50BX |
| HR510X50 |
| H06910 |
| 010810 |
| 010810A |
| 10810 |
| 86609 |
| 10C5CX50FT |
| 9X2366 |
| Y910 |
| GYHGR5-10X50 |
| SR510 |
| H16910 |
| DR51050 |
| 150310 |
| 265110 |
| 20110 |
| 20126110 |
| 22510 |
| 04030382 |
| 36581766 |