Green Stripe Wire Inserted Straight Coolant Hose
#GAT24932
Features & Benefits
- Engineered with compounds which resist electrochemical degradation
- Exceeds SAE 20R2 Type EC (Class D2 Tube and cover) except in vacuum applications
Specifications
Application | Open-end water discharge applications and coolant on marine and stationary engines where tight bends or suction capabilities are required. |
Caution | Do not use for fuel or oil transfer applications. |
Color | Black |
Construction | Type P (EPDM). Black with green stripe. |
Construction Cover | Type P (EPDM). Black with green stripe |
Construction: Reinforcement | Multiple plies of synthetic fabric and two built-in helical steel wires |
Construction Tube | Type P (EPDM). Black |
Descriptive Features | FREE UP SOME CLOSET SPACE.: With solutions fit to so many applications in under 25 sizes. your need to store. manage. and buy additional hoses will significantly decrease. More applications. fewer hoses. less money - that's how Gates works to better your business. and Power Your Progress. INSPECTING YOUR COOLANT HOSE.: As part of our Be System Part initiative. we recommend regularly inspecting your critical vehicle systems. including your cooling system and hoses. at around 60.000 miles. As your coolant hose begins to age. the constant transfer of chemical fluids will corrode your hose from the inside out. When inspecting your coolant hose. there are a few simple signs that it's ready for replacement: Press for Soft Spots. The radiator hose is naturally rigid. and any soft spots along the hose body indicates the inner material has begun to break down. Firmly press on the hose body to feel for potential deteriorations. Check the Ends and Fittings. Look for cracks around the hose end. especially near the hose clamps. Feel for Bulges. Run your hands along the hose body to feel for protruding materials. which indicate a rupture within the hose that will eventually lead to failure. |
Design Factor | 0,1673611111111111 |
Inside Diameter | 2 in (5.08 cm) |
Length | 5 ft (1.52 m) |
Material | EPDM |
Maximum Working Pressure (bar) | 59.47 psi (4.1 bar) |
Maximum Working Pressure (PSI) | 60 psi (4.14 bar) |
MBR (in.) | 4-1/2 in (11.43 cm) |
Meets These Agency Specifications | SAE - Society of Automotive Engineers |
Minimum Bend Radius (in) | 4-1/2 in (11.43 cm) |
Note | Long spans must be supported every 3 feet. |
Product Number | 46852032 |
Recommended For | Open-end water discharge applications and coolant on marine and stationary engines where tight bends or suction capabilities are required |
Standard Industry Specification | SAE 20R2 |
Standards | Meets requirements of SAE 20R2 (20R5 Burst) |
Standards: Cover | Meets D1 and D2 |
Standards: Tube | Meets D1 and D2. Meets D3 except for air aging standard |
Suggested Fit (Hose O.D. in.) | 2-29/64 in (6.22 cm) |
Vacuum Rating | 20 inhg (9.83 psi) |
Weight | 5.07 lb (2.3 kg) |
Wt. Per ft | 5-1/16 ft (1.54 m) |