M/Trsax Input Speedi-Sleeve
#SKF99098
Sommaire du produit
Our Speedi Sleeves Repair Scored to Restored in a Few Minutes With a Few Easy Steps With No Special Tooling.
Caractéristiques et avantages
Caractéristiques et avantages
SKF99098 - Documents de caractéristiques - A
SKF99098 - Documents de caractéristiques - B
SKF99098 - Documents de caractéristiques - C
SKF99098 - Documents de caractéristiques - D
SKF99098 - Documents de caractéristiques - E
- Although Installation is Simple, it Should be Done Carefully to Achieve the Best Results.
- Before Starting, the Sealing Zone of the Shaft Should be Carefully Cleaned and Any Burrs or Rough Spots Should be Filed Down and Polished.
- Deep Wear Grooves, Scratches or Very Rough Surfaces Should be Treated With a Suitable Powdered Metal Epoxy Filler.
- The Sleeve Must be Positioned on the Shaft Before the Filler Has Hardened.
- It Should Also be Noted that Although Speedi Sleeves Can be Easily Installed Within Minutes on Most Shafts.
- They Should NOT Be Placed Over Splines or Keyways, etc on the Shaft.
- Commonly Used on End Yokes, Input/Output Shafts, Crankshafts, Camshafts, Accessory Drive Shafts, or Wherever Needed to Alleviate Additional Costs and Downtime.
- A Mallet or Rubber Hammer is Commonly Used to Drive the Sleeve on the Shaft With an Enclosed Driver Tool.
- Instructions Included With Most All of Our Speedi Sleeves.
- Manufactured to Meet or Exceed O.E.M. Specifications in Function, Form & Fit.
Spécifications
| Compatible avec le diamètre de l'arbre | .982 in. To .984 in. / 24.94 mm To 25.04 mm |
| Diamètre de bride | 1-19/64 in (3.3 cm) |
| Épaisseur | 5/16 in (0.79 cm) |
Interchanges et pièces équivalentes:
| 18U242D2 |
| 5P6160 |
| 494611 |
| 6002053 |
| 6353818 |
| 145899098 |
| CR99098 |
| 965899098 |
| 99098 |
| 99098CHR |
| 99098RS |
| CHR99098 |
| N99098 |
| NN99098 |
| ZAR99098 |
| 2948B94G01 |
| 4133458100 |
| 27SR3458 |