Male DIN 24 Cone - Heavy Series (MegaCrimp)
#GATG25715-1630
Product Overview
Gates MegaCrimp Couplings are Designed for use w/ Gates Wire Braid Hydraulic Hose to Create a Robust, Leak-Free Assembly. The Pre-Assembled Coupling is Designed w/ a Patented C Insert Attached to the Ferrule.
Features & Benefits
- This Design Ensures that Crimping Forces are Evenly Distributed to Form a Concentric, Leak-Free Seal.
- Robust Bite-the-Wire Crimp. Low Profile. Full-Stem Insertion. Full-Length Crimp. Tested to Industry-Leading 600,000 Impulse Cycles.
- Simplifies Inventory Management. Environmentally-Friendly TuffCoat Plating for 345 Percent Better Corrosion Resistance than SAE Standard.
- One MegaCrimp Coupling Size can Accommodate Various 1 and 2 Wire Braid Hydraulic Hoses of Different Constructions & Wall Thicknesses, Simplifying Inventory Requirements, Helping to Reduce Costs & Simplifying Coupling Selection.
- See Accessories for Metric Bite Sleeves & Nuts.
Specifications
| Angle | 0 deg |
| Coupling Description | MegaCrimp Male DIN 24 Cone - Heavy Series |
| Cut Off (in) – C | 1-43/64 in (4.24 cm) |
| Cut Off (mm) – C | 42.4 mm |
| Thread Size | M42X2.0 |
| Fitting Type | Male |
| Hose I.D. (mm) | 25.4 mm |
| Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose |
| Industrial Description | 16G-30MDH |
| Inside Diameter | 1 in (2.54 cm) |
| Length | 3-31/64 in (8.85 cm) |
| Length (in) – L | 3.48 |
| Length (mm) – L | 88.3 mm |
| Stem Hex (mm) – H1 | 46 mm |
| Thread | M42 x 2.0 |
| Type | MegaCrimp Male DIN 24 Cone - Heavy Series |