Male O-Ring Boss (MegaCrimp)
#GATG25120-1008
Product Overview
Gates MegaCrimp Couplings are Designed for use w/ Gates Wire Braid Hydraulic Hose to Create a Robust, Leak-Free Assembly. The Pre-Assembled Coupling is Designed w/ a Patented C Insert Attached to the Ferrule.
Features & Benefits
- This Design Ensures that Crimping Forces are Evenly Distributed to Form a Concentric, Leak-Free Seal.
- SAE J1926/3 ISO 11926-3 Light-Duty (L Series) Stud End.
- Robust Bite-the-Wire Crimp. Low Profile. Full-Stem Insertion. Full-Length Crimp. Tested to Industry-Leading 600,000 Impulse Cycles.
- Simplifies Inventory Management. Environmentally-Friendly TuffCoat Plating for 345 Percent Better Corrosion Resistance than SAE Standard.
- One MegaCrimp Coupling Size can Accommodate Various 1 and 2 Wire Braid Hydraulic Hoses of Different Constructions & Wall Thicknesses, Simplifying Inventory Requirements, Helping to Reduce Costs & Simplifying Coupling Selection.
Specifications
| Angle | 0 deg |
| Coupling Description | MegaCrimp Male O-Ring Boss |
| Cut Off (in) – C | 1-23/64 in (3.45 cm) |
| Cut Off (mm) – C | 34.5 mm |
| Thread Size | 3/4/16 |
| Fitting Type | Male |
| Hose I.D. (mm) | 15.9 mm |
| Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose |
| Industrial Description | 10G-8MB |
| Inside Diameter | 5/8 in (1.6 cm) |
| Length | 2-53/64 in (7.19 cm) |
| Length (in) – L | 2.83 |
| Length (mm) – L | 72 mm |
| Stem Hex (in) – H1 | 0.9375 |
| Type | MegaCrimp Male O-Ring Boss |