Molded Coolant Hose, EPDM, L: 14 in, ID: 2-63/64 in
#GAT21042
Features & Benefits
- Approved for marine applications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25mm (1") ID, SAE 20R4 EC Class D1 for 25mm (1") ID and over
- Specifically engineered materials resist vacuum collapse to reduce the need for internal springs in many applications
- Custom shapes available with minimum order quantity and setup charge
- Recommended for upper, lower, by-pass, heater and other coolant hose applications
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- EPDM tube, synthetic fiber knit reinforcement, heat- and ozone-resistant EPDM cover
Specifications
| Caution | Do not use for fuel or oil transfer applications. |
| Contains Spring | No |
| Inside Diameter 1 (in) | 2-63/64 in (7.57 cm) |
| Inside Diameter 2 (in) | 2-63/64 in (7.57 cm) |
| Length | 14 in (35.56 cm) |
| Material | EPDM |
| Modular Hose | No |
| Note | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip SB Clamps each time a new coolant hose is installed. |
| Number of Branches | 0 |
| Temperature Range | -40°F @ 275°F (-40°C @ 135°C) |
| Weight | 1.81 lb (0.82 kg) |
Interchanges & Equivalent parts:
| 60868 |
| GYB60868 |
| 116799 |
| 2079382 |
| 3081830 |
| 387155 |
| 529696 |
| 70870 |
| 730799 |
| 7754 |
| 027016486 |
| 027068056 |
| 0518901000 |
| 10MF19301P3 |
| 10MF193P013 |
| 1108177C2 |
| 11MF3574M12 |
| 11MF3574M13 |
| 11MF3574M19 |
| 204070048 |
| 204230009 |
| 204230010 |
| 204230038 |
| 204230044 |
| 204230045 |
| 204233204 |
| 204233401 |
| 204233402 |
| 204233403 |
| 204233404 |
| 204233405 |
| 204233406 |
| 204233407 |
| 204233408 |
| 22112M |
| 3482E016 |
| 4021402 |
| 681874C1 |
| 69411C2 |
| 8003043 |
| 86016686 |
| A00106 |
| D70870 |
| KM-296 |
| KM-959 |
| L40644 |
| MH1042 |
| MR231 |
| T158297 |
| T161994 |
| T40796 |
| V1092067 |
| V1092073 |
| 0080035117 |
| 5327653002 |