Molded Coolant Hose, EPDM, L: 3 in, ID: 2-1/64 in
#GAT20532
Features & Benefits
- Approved for marine applications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25mm (1") ID, SAE 20R4 EC Class D1 for 25mm (1") ID and over
- Specifically engineered materials resist vacuum collapse to reduce the need for internal springs in many applications
- Custom shapes available with minimum order quantity and setup charge
- Recommended for upper, lower, by-pass, heater and other coolant hose applications
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- EPDM tube, synthetic fiber knit reinforcement, heat- and ozone-resistant EPDM cover
Specifications
| Contains Spring | No |
| Inside Diameter 1 (in) | 2-1/64 in (5.13 cm) |
| Inside Diameter 2 (in) | 2-1/64 in (5.13 cm) |
| Length | 3 in (7.62 cm) |
| Material | EPDM |
| Modular Hose | No |
| Number of Branches | 0 |
| Temperature Range | -40°F @ 275°F (-40°C @ 135°C) |
| Weight | 0.33 lb (0.15 kg) |
Interchanges & Equivalent parts:
| 60695 |
| 1753139 |
| 236252 |
| 2404516 |
| 259563 |
| 2024500 |
| 7418 |
| 20033S |
| 5031074 |
| 562425C1 |
| 58A0988 |
| 7922593 |
| 8540101011 |
| 897558R1 |
| A59563 |
| B70605 |
| BH-1106 |
| C1TT 8A191 A |
| C1TZ 8286 J |
| CH532 |
| D0HA 8260 AK |
| D0HZ 8260 C |
| D141532 |
| D2HA 8260 AMA |
| D53107 |
| F1HT 8260 ACA |
| F1HZ 8260 M |
| F1HZ 8260 N |
| F2HT 8260 JA |
| F2HT 8260 KA |
| F2HZ 8260 N |
| GTF21022SB |
| H86267 |
| KM-192 |
| KM-2908 |
| KM-57 |
| MH0532 |
| MH376 |
| R38249 |
| T31179 |
| 103091A |