Molded Coolant Hose, L: 8-3/32 in, ID: 63/64 in
#GAT20566
Features & Benefits
- Approved for marine applications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25mm (1") ID, SAE 20R4 EC Class D1 for 25mm (1") ID and over
- Specifically engineered materials resist vacuum collapse to reduce the need for internal springs in many applications
- Custom shapes available with minimum order quantity and setup charge
- Recommended for upper, lower, by-pass, heater and other coolant hose applications
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- EPDM tube, synthetic fiber knit reinforcement, heat- and ozone-resistant EPDM cover
Specifications
| Contains Spring | No |
| Inside Diameter 1 (in) | 63/64 in (2.49 cm) |
| Inside Diameter 2 (in) | 63/64 in (2.49 cm) |
| Length | 8-3/32 in (20.55 cm) |
| Material | EPDM |
| Modular Hose | No |
| Note | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip SB Clamps each time a new coolant hose is installed. |
| Number of Branches | 0 |
| Temperature Range | -40°F @ 275°F (-40°C @ 135°C) |
| Weight | 0.41 lb (0.19 kg) |
Interchanges & Equivalent parts:
| 1164494 |
| 3839178 |
| 564 |
| 63750 |
| 70564 |
| 14-2106-6 |
| 20041S |
| 2104733M10 |
| 2104733M12 |
| 478045C1 |
| A70564 |
| BH-1535 |
| BP0566 |
| BP891 |
| C0566 |
| CH566 |
| KM-2082 |
| KM-643 |
| MH-3566 |
| MH0566 |
| MH380 |
| MR891 |
| 10490184 |