Narrow Section Molded Notch V-Belt, W: 1-1/2 in
#GAT4/3VX900
Sommaire du produit
The Powerband Construction Allows Multiple Belts To Function As A Single Unit, w/ Even Load Distribution & Each Strand Fitting Securely In The Sheave Groove.
Caractéristiques et avantages
- Meets RMA Oil & Heat Resistant Standards.
- The Tie Band Assures High Lateral Rigidity, Guiding The Belt In A Straight Line & Preventing It From Coming Off The Drive.
- Flex-Bonded Cords Are Strongly Bonded To The Body Of The Belt Resulting In Equal Load Distribution & The Absorption Of Bending stress w/o Cord Deterioration.
- Notches Molded Into The Belt During Manufacturing Make This Belt Well Suited For Drives w/ Smaller Diameter Sheaves.
- Recommended For Multiple V-Belt Drives Exposed To Pulsating Or Heavy Shock Loads Which Can Make Belts Whip, Turn Over Or Jump Off The Drive.
- Meets RMA Static Conductivity Requirements.
- Oil Resistant
Spécifications
| Belt Top Width | 1-1/2 to 1-5/8 in (3.81 to 4.14 cm) |
| Belt Type | Belt with Ends Joined |
| Construction | Banded, Cogged |
| Length | 90 in |
| Material | EPDM |
| # of Grooves | 4 |
| Overall Height | 21/64 in (0.84 cm) |
| Reinforcing cord material | Polyester |
| Section | 3VX |
| Standard | RMA |
| Length Range | 90 to 99.99 in |
| Temperature Range | -60°F to 250°F (-51.1°C to 121.1°C) |
| Top Width Per Strand (in) | 25/64 in (0.99 cm) |
| Type | Narrow Section Molded Notch V-Belt |
| Weight | 2.24 lb (1.02 kg) |
| Width | 1-1/2 in (3.81 cm) |
Interchanges et pièces équivalentes:
| 43VX900 |
| 4GB3VX900 |
| A3VX90004 |
| 4/3VX900 |
| 93884090 |