Narrow Section Molded Notch V-Belt, W: 3/4 in
#GAT2/3VX900
Product Overview
The Powerband Construction Allows Multiple Belts To Function As A Single Unit, w/ Even Load Distribution & Each Strand Fitting Securely In The Sheave Groove.
Features & Benefits
- Meets RMA Oil & Heat Resistant Standards.
- The Tie Band Assures High Lateral Rigidity, Guiding The Belt In A Straight Line & Preventing It From Coming Off The Drive.
- Flex-Bonded Cords Are Strongly Bonded To The Body Of The Belt Resulting In Equal Load Distribution & The Absorption Of Bending stress w/o Cord Deterioration.
- Notches Molded Into The Belt During Manufacturing Make This Belt Well Suited For Drives w/ Smaller Diameter Sheaves.
- Recommended For Multiple V-Belt Drives Exposed To Pulsating Or Heavy Shock Loads Which Can Make Belts Whip, Turn Over Or Jump Off The Drive.
- Meets RMA Static Conductivity Requirements.
- Oil Resistant
Specifications
| Belt Top Width | 3/4 to 7/8 in (1.91 to 2.24 cm) |
| Belt Type | Belt with Ends Joined |
| Construction | Banded, Cogged |
| Length | 90 in |
| Material | EPDM |
| # of Grooves | 2 |
| Overall Height | 21/64 in (0.84 cm) |
| Reinforcing cord material | Polyester |
| Section | 3VX |
| Standard | RMA |
| Length Range | 90 to 99.99 in |
| Temperature Range | -60°F to 250°F (-51.1°C to 121.1°C) |
| Top Width Per Strand (in) | 25/64 in (0.99 cm) |
| Type | Narrow Section Molded Notch V-Belt |
| Width | 3/4 in (1.91 cm) |
Interchanges & Equivalent parts:
| 23VX900 |
| A3VX90002 |
| 2GB3VX900 |
| 2/3VX900 |
| 93882090 |