Oil Pan - New
#SPEFP01A
Product Overview
Innovative Engineering, Manufacturing Technology And Quality Control Ensure That Spectra Premium Oil Pans Meet Or Exceed The Performance Of The Original Equipment They Replace.
Features & Benefits
Features & Benefits
SPEFP01A - Features Documents - A
SPEFP01A - Features Documents - B
SPEFP01A - Features Documents - C
- Unit Is Designed To OE Fit, Form And Function Requirements Accomplished By Leveraging Our OE Expertise
- Durable Powder Coating Applied To Exterior Of Oil Pan For A Long Lasting Rust Free Unit
- Washed And Then Sealed With An Anti-Corrosive Spray On The Interior For A Rust Free Unit At Installation
- Fit Tested On The Very Same Vehicle Application For Which It Was Developed Verifying First-Hand That The Design Fits Properly And Can Be Easily Installed
- Engineered To Stringent Tolerances Based On Our Canadian Engineers In-Depth Knowledge Of The OE Part It is Designed To Replace
- Road Tested To Ensure Real World Performance And To Verify That Each Design Meets Our High Standards For Quality
- Coating Salt Spray Tested For Over 200 Hours To Insure Durability
- Addition Of Threaded Stainless Steel Inserts In The Aluminum Pans To Increases Product Lifespan By Providing Increased Durability While Maintaining The OE Drain Plug Specifications
Specifications
| Baffled | No |
| Capacity | 6 QT |
| Color | Black |
| Contents | 1 Engine Oil Pan |
| Crank Shaft Wiper Included | No |
| Depth (Inches) | 9 in. |
| Depth (mm) | 229 mm |
| Dipstick Port | No |
| Drain Plug Included | Yes |
| Engine Oil Cooler Return Fitting | No |
| Finish | Black Powder Coating |
| Gasket Or Seal Included | No |
| Kick Out Type Pan | No |
| Length | 22-1/2 in (57.15 cm) |
| Length (in.) | 22 1/2 in. |
| Length (Inches) | 22 1/2 in. |
| Length (mm) | 572 mm |
| Material | Cold Rolled Steel (EDDQ) |
| Maximum Width | 11 3/8 in. |
| Mount Hole Quantity | 22 |
| New or Remanufactured | New |
| Oil Drain Plug Thread Size | M14 x 1.5 |
| Oil Level Sensor Port | No |
| Oil Pan Capacity | 6 QT |
| Oil Pan Material | Cold Rolled Steel (EDDQ) |
| Packaging | Box, Corrugated Or Solid |
| Pickup Included | No |
| Product Application | 96-80 Ford Bronco; 96-85 Ford E-150 Econoline; 96-85 Ford E-150 Econoline Club Wagon; 91-85 Ford E-250 Econoline; 82-81 Ford F-100; 83-80 Ford F-100; 96-80 Ford F-150; 97-80 Ford F-250; 80 Ford F-350; 97-95 Ford F-350; 98 Ford F-350 |
| Sump Type | Wet |
| Sump Location | Rear |
| Width (Inches) | 11 3/8 in. |
| Width (mm) | 289 mm |
| Windage Tray Included | No |
Interchanges & Equivalent parts:
| 103023 |
| 613 |
| 613B |
| 501037 |
| 480 |
| FP01A |
| KFP1A |
| F6TZ6675MA |
| RFP01A |
| 264002 |
| F1TZ6675A |
| SPIFP01A |
| 3310001 |
| OP37524 |
| IFP01B |
| SK264002 |
| DOR264002 |
| IFP01A |