Don't miss our Buy Online & Win promotion from May 15 to June 15! More details on the Flyers section.
Premium Molded Coolant Hose
Features & Benefits
- Approved for marine applications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25mm (1") ID, SAE 20R4 EC Class D1 for 25mm (1") ID and over
- Specifically engineered materials resist vacuum collapse to reduce the need for internal springs in many applications
- Custom shapes available with minimum order quantity and setup charge
- Recommended for upper, lower, by-pass, heater and other coolant hose applications
- EPDM tube, synthetic fiber knit reinforcement, heat- and ozone-resistant EPDM cover
Specifications
| Caution | Do not use for fuel or oil transfer applications. |
| Contains Spring | No |
| Descriptive Features | ELIMINATING ECD.: When creating our FleetRunner Coolant Hose, we wanted to tackle the leading cause of hose failure: electrochemical degradation or ECD. This occurs when the hose, liquid coolant, and engine/radiator �?ttings form a galvanic cell or "battery," creating a chemical reaction that allows micro-cracks to form in the hose tube. Coolant seeps into these cracks or striations and breaks down the reinforcement, leading to hose failure and, ultimately, roadside breakdowns. We worked to engineer our EPDM coolant hose material compound with superior electrochemical resistance, so your Gates coolant hoses will last longer and keep your engine systems running stronger. O-E-MOLDED: For a secure fit to virtually every vehicle on the road today, Gates precision-manufactures our molded engine hoses with exclusively-developed factory processes to ensure compatibility and exceptional performance to specific vehicle manufacturer specifications. |
| Inside Diameter 1 (in) | 39/64 in (1.55 cm) |
| Inside Diameter 2 (in) | 3/4 in (1.91 cm) |
| Length | 5-13/64 in (13.21 cm) |
| Material | EPDM |
| Modular Hose | No |
| Note | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip SB Clamps each time a new coolant hose is installed. |
| Number of Branches | 0 |
| Product Number | 42610662 |
| Temperature Range | 40°F to 275°F (-40°C to 135°C) |
| UPC | 072053052305 |
| Weight | 0.15 lb (0.07 kg) |
| Wt. Per ft | 3/32 ft (0.03 m) |
Interchanges & Equivalent parts:
3188865, 361030, 63726, 642209, 14-1782-0, 14213S, 2003, 25533059, 4241670, 51317068, 6450-12004, 77-8375-6, 67969, 70646, 7447, 740 55, 77-8465-5, 811121109B, 9240601P04, A70646, A71518, BH-1511, BP-726, BP-8, BP0662, BP867, BP9, C0662, C2OZ 8597 D, C9DE 8597 D, C9OE 8597 D, C9OE 8597 E, C9OZ 8597 B, CB8, CH662, D00Z 8597 B, D0OE 8597 A, D0OE 8597 B, D0OE8579B, D0OZ 8597 B, D20E 8597 AB, 89022534, 88956889, D2OE 8597 AA, D2OE 8597 AB, D2OE 8597 BA, D2OE 8597 CA, D2OE 8597 DA, D2OZ 8597 AA, D5ZE 8597 AA, D9AE 8597 AA, D9AE 8597 B, D9AE 8597 BA, D9AZ 8597 A, D9AZ 8597 AA, D9AZ 8597 B, D9ZE 8597 AA, D9ZZ 8597 B, E6TZ 8597 B, E8TE 8A506 BC, E9AE 8597 AA, F1SE 8597 A, F1SE 8597 AB, F1SE 8597 AC, F1SZ 8597 A, F7SE 8597 AC, KM-1081, KM-1082, KM-1083, KM-1935, KM-640, MH0662, MH239, MH5, MR867, P20662, RH138, T8375, 10065571, 14-1782-0, 14213S, 2003, 4241670, 642209, 25533059, 63726, 3188865, 51317068, 6450-12004, 361030, BP0662, D0OZ 8597 B, D0OE8579B, C9DE 8597 D, 811121109B, A71518, 9240601P04, C9OZ 8597 B, 77-8375-6, 77-8465-5, BP-8, C0662, C9OE 8597 E, D00Z 8597 B, 7447, BH-1511, D20E 8597 AB, C2OZ 8597 D, BP-726, A70646, CB8, CH662, D0OE 8597 A, 740 55, 89022534, 67969, C9OE 8597 D, D0OE 8597 B, BP9, BP867, 70646, D2OE 8597 DA, E9AE 8597 AA, D9AZ 8597 A, E8TE 8A506 BC, D9ZZ 8597 B, D9AE 8597 BA, D2OE 8597 AB, KM-1935, KM-640, D9ZE 8597 AA, MH0662, KM-1082, D9AZ 8597 B, D2OE 8597 CA, KM-1081, D2OZ 8597 AA, F7SE 8597 AC, D9AE 8597 AA, D9AZ 8597 AA, F1SE 8597 AC, F1SE 8597 AB, F1SE 8597 A, MH239, MH5, D5ZE 8597 AA, F1SZ 8597 A, E6TZ 8597 B, KM-1083, 88956889, D2OE 8597 BA, RH138, D2OE 8597 AA, P20662, T8375, D9AE 8597 B, MR867, 10065571