2 POINTS
Silicone Straight Heater Hose
#GAT26244
Features & Benefits
- Use with Gates PowerGrip SB clamps or Gates silicone hose clamps.
- Approved for marine applications
- Suitable for emission hose applications.
- Exceeds SAE 20R3 Class A Tube and Cover
- High flexibility for versatile applications
- High environmental resistance to weathering, coolant deterioration, and ozone
- Polyester textile cord reinforcement for high durability
Specifications
| Caution | Do not use for fuel or oil transfer applications. |
| Descriptive Features | THE ART OF MATERIAL SCIENCE: Durion Silicone Heater Hoses build on our decades of innovation in material science. This long-service-life hose is constructed of specially formulated silicone rubber with three-ply aramid textile cord reinforcement. This makes for an exceptionally durable fluid power solution that offers maximum performance across a wide operating temperature range. INSPECTING YOUR COOLANT HOSE.: As part of our Be System Part initiative. we recommend regularly inspecting your critical vehicle systems. including your cooling system and hoses. at around 60.000 miles. As your coolant hose begins to age. the constant transfer of chemical fluids will corrode your hose from the inside out. When inspecting your coolant hose. there are a few simple signs that it's ready for replacement: Press for Soft Spots. The radiator hose is naturally rigid. and any soft spots along the hose body indicates the inner material has begun to break down. Firmly press on the hose body to feel for potential deteriorations. Check the Ends and Fittings. Look for cracks around the hose end. especially near the hose clamps. Feel for Bulges. Run your hands along the hose body to feel for protruding materials. which indicate a rupture within the hose that will eventually lead to failure. |
| Inside Diameter | 1 in (2.54 cm) |
| Length | 25 ft (7.62 m) |
| Material | Silicone |
| Product Number | 32300044 |
| Weight | 10.32 lb (4.68 kg) |
| Wt. Per ft | 10-5/16 ft (3.14 m) |
