2 POINTS
Super HC and Super HC Molded Notch PowerBand Belt
#GAT5/3VX450
Product Overview
The Powerband Construction Allows Multiple Belts To Function As A Single Unit, w/ Even Load Distribution & Each Strand Fitting Securely In The Sheave Groove.
Features & Benefits
- Meets RMA Oil & Heat Resistant Standards.
- The Tie Band Assures High Lateral Rigidity, Guiding The Belt In A Straight Line & Preventing It From Coming Off The Drive.
- Flex-Bonded Cords Are Strongly Bonded To The Body Of The Belt Resulting In Equal Load Distribution & The Absorption Of Bending stress w/o Cord Deterioration.
- Notches Molded Into The Belt During Manufacturing Make This Belt Well Suited For Drives w/ Smaller Diameter Sheaves.
- Recommended For Multiple V-Belt Drives Exposed To Pulsating Or Heavy Shock Loads Which Can Make Belts Whip, Turn Over Or Jump Off The Drive.
- Meets RMA Static Conductivity Requirements.
- Oil Resistant
Specifications
Band Type | Belt with Ends Joined |
Belt Top Width | 1-7/8 to 2 in (4.78 to 5.08 cm) |
Contact Surface | Banded, Cogged |
Length | 45 in (114.3 cm) |
Material | EPDM |
# of Grooves | 5 |
Overall Height | 21/64 in (0.84 cm) |
Reinforcing cord material | Polyester |
Section | 3VX |
Standard | RMA |
Top Width Per Strand (in) | 25/64 in (0.99 cm) |
Type | Narrow Section Molded Notch V-Belt |
Weight | 1.32 lb (0.6 kg) |
Width | 1-7/8 in (4.78 cm) |