TAPER CONE
#TIM25880
Specifications
| Bore (d) | 1.4365 in (36.487 mm) |
| Cage-Cone Frontface Clearance (Ab) | 0.09 in (2.3 mm) |
| Cage-Cone Backface Clearance (Aa) | 0.02 in (0.5 mm) |
| Cage Type | Stamped Steel |
| Cone Backface Backing Diameter (db) | 1.73 in (44 mm) |
| Cone Backface "To Clear" Radius (R) | 0.06 in (1.520 mm) |
| Cone Frontface Backing Diameter (da) | 1.65 in (42 mm) |
| Cone Width (B) | 0.9688 in (24.608 mm) |
| Design Units | Imperial |
| Dynamic Radial Rating (1 million revolutions) (C1) | 19100 lbf (85100 N) |
| Dynamic Radial Rating (90 million revolutions) (C90) | 4960 lbf (22100 N) |
| Dynamic Radial Rating (Two-Row, 90 million revolutions) (C90(2)) | 8640 lbf (38400 N) |
| Dynamic Radial Rating (Two-Row, 1 million revolutions) (C1) | 33300 lbf (148000 N) |
| Dynamic Thrust Rating (90 million revolutions) (Ca90) | 2460 lbf (11000 N) |
| Effective Center Location (a) | -0.32 in (-8.1 mm) |
| Factor (K) | 2.01 |
| Heat Generation Factor (Rib-Roller End) (G2) | 10.9 |
| Heat Generation Factor (Roller-Raceway) (G1 ) | 26.4 |
| Geometry Factor (Cg) | 0.0695 |
| Static Radial Rating (C0) | 21900 lbf (97400 N) |