Charge Air Cooler Hose Connector

25 psi (1.72 bar) 

0.5 lb (0.23 kg) 

0.56 lb (0.25 kg) 

0.6 lb (0.27 kg) 

-60°F to 500°F (-51°C to 260°C) 

5 to 6 in 

7 to 8 in 

15 psi (1.03 bar) 

50 psi (3.45 bar) 

55 psi (3.79 bar) 

60 psi (4.14 bar) 

Silicone 

3,5 in (88,9 mm) 

4,02 in (102,2 mm) 

2-47/64 in (6.93 cm) 

3-15/64 in (8.2 cm) 

3-47/64 in (9.47 cm) 

4-15/64 in (10.74 cm) 

3-Ply Silicone Coated Polyester Fabric with Stainless Steel Pressure Retention Rings 

4-Ply Silicone Coated Meta-Aramid Fabric with Stainless Steel Pressure Retention Rings 

4-Ply Silicone Coated Meta-Aramid Fabric with Stainless Steel Pressure Retention Rings where noted 

Hot or Cold Side: 4-Ply Heavy Duty Silicone Coated Meta-Aramid Fabric with Heavy Duty Stainless Steel Pressure Retention Rings. Duraguard: 4-Ply Heavy Duty Silicone Coated Meta-Aramid Fabric with Heavy Duty Stainless Steel Pressure Retention Rings High temperature fluorocarbon elastomeric liner 

Blue 

Blue & Red 

Red 

Red & Blue 

6 in (15.24 cm) 

8 in (20.32 cm) 

Automann 

Donaldson 

Flexfab 

Gates 

Tectran 

Hot or Cold Side: Used on diesel engines to deliver pressurized intake air to the charge air intercooler and intake manifold. Duraguard: Used on diesel engines to deliver pressurized intake air to the charge air intercooler and intake manifold. Fluorocarbon lining eliminates closed crankcase vapors from permeating through the sidewall of the intercooler connection bellows at 500°F (260°C) 

Used on diesel engines to deliver pressurized intake air to the charge air intercooler and intake manifold. 

Used on diesel truck engines to deliver pressurized intake air to the charge air intercooler and intake manifold.