TopStart Engine Heater, Die-Cast Aluminum, 3/4 in Inlet, 3/4 in Outlet, NPT Inlet, NPT Outlet, 7 to 8.8 gpm at 4.7 psi Flow Rate
#TEMTSG230160MCBTSCB
Product Overview
Circulates warm coolant throughout the engine to provide even heat distribution.Engine Heater, TopStart, NPT Inlet, NPT Outlet, Die-Cast Aluminum, 7 to 8.8 gpm at 4.7 psi Flow Rate, 60 Hz, 3/4 in Inlet, 3/4 in Outlet, 1 Phase, 6530 W, UL, 240 V, For Gensets, Large Equipment, 630 mm Length, 248.5 mm Width, 205 mm Height
Features & Benefits
- Die cast aluminum body
- Mounting and connection (3/4 in NPT or BSP) kit included
- PA66 electrical cover and supports base
- Glandless circulation pump
- Flow rate: 1.6 to 2 cu m/h to 3 m height manometer (7 to 8.8 gpm at 4.7 psi)
- Available power 0.5 to 12 kw 120, 208, 230, 240, and 480 V 50 or 60 Hz
- 1 and 3 phase
- Adjustable, regulating thermostat 32 to 176 °F (0 to 80 °C)
- Safety thermostat 230 °F (110 °C), manual reset rated at 25 A
- 4.9 ft (150 cm) power cable
Specifications
| Length | 630 mm |
| Phase | 1 |
| Type | TopStart |
| Application | Gensets, Large Equipment |
| Flow Rate | 7 to 8.8 gpm at 4.7 psi |
| Frequency | 60 Hz |
| Height | 205 mm |
| Inlet Size | 3/4 in |
| Inlet Type | NPT |
| Material | Die-Cast Aluminum |
| Outlet Type | NPT |
| Outlet Size | 3/4 in |
| Standards | UL |
| Voltage Rating | 240 V |
| Width | 248.5 mm |
| Manufacturer Part Number | TSG230160MCBTSCB |
| Product Category | Engine Heater |