Appareil De Recuperation A/C
#NTE69789-H
Sommaire du produit
Unité hybride de récupération, recyclage et recharge. Performance de qualité année après année. Grand écran graphique de 4,3 po. Conception certifiée conforme à la norme SAE J2788. Les nouveaux systèmes de climatisation sont plus petits. Les machines doivent charger dans une marge de 0,5 oz et récupérer 95%.
Caractéristiques et avantages
- Automatic, programmable or manual modes. Can be programmed to complete a continuous recovery / recycle, vacuum, vacuum leak test and recharge. Can also be set to run each operation individually.
- Auto filter alarm on LCD and alarm will warn that a filter change is required. Compact footprint design makes it easy to maneuver and requires minimal shop space. Full tank alarm notifies operator when tank is full.
- Low refrigerant alarm notifies operator when refrigerant is low. Automatic oil injection with electronic scale to protect the contents against contact and ambient humidity. Thermal printer provides complete, detailed report.
- Fully integrated real loop, flushes service hoses only by refrigerant circulation eliminates the risk that resides of different (non-insulating) oils may be injected into the A/C system, jeopardizing its safety and operation.
- High voltage protection.02 lb (10 g) scale resolution, dual filters for humidity. Hermetically sealed compressor. 30 lb refillable recovery cylinder. 96" hoses. Standard equipment thermal printer. Class 1 pressure gauges.
- Includes refrigerant capacity database (over 1,000 vehicles) for US and import makes and models from 1995 to 2012. Capable of software upgrade as well. Auto vacuum leak test performs vacuum leak test and will inform the technician of possible leaks.
- Auto oil discharge during recovery process. If oil is present, it will drain into a graduated container clearly displaying the amount of oil that was removed. Auto air purge of non-condensable gas (NCG) from the storage tank during recovery.
Spécifications
| Contient | (1) Recovery Unit |
| Rendement effectif | 12 cc High Pressure |
| Température de fonctionnement | 59°F à 120°F |
| Tension d'utilisation | 115 Volts AC / 60 Hz |
| Cote | 6 cfm (30 min Avg Recovery) |
| Type de réfrigérant | R134A |
Interchanges et pièces équivalentes:
| 69789-H |