Premium Molded Coolant Hose
#GAT20933
Caractéristiques et avantages
- Approved for marine applications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25mm (1") ID, SAE 20R4 EC Class D1 for 25mm (1") ID and over
- Specifically engineered materials resist vacuum collapse to reduce the need for internal springs in many applications
- Custom shapes available with minimum order quantity and setup charge
- Recommended for upper, lower, by-pass, heater and other coolant hose applications
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- EPDM tube, synthetic fiber knit reinforcement, heat- and ozone-resistant EPDM cover
Spécifications
| Centerline Length | 26-1/2 in (67.31 cm) |
| Contains Spring | No |
| Inside Diameter 1 (in) | 2-1/64 in (5.13 cm) |
| Inside Diameter 2 (in) | 2-1/64 in (5.13 cm) |
| Material | EPDM |
| Modular Hose | No |
| Note | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip SB Clamps each time a new coolant hose is installed. |
| Number of Branches | 0 |
| Temperature Range | -40°F @ 275°F (-40°C @ 135°C) |
| Weight | 2.17 lb (0.98 kg) |
Interchanges et pièces équivalentes:
| 2021702 |
| 20934 |
| 60753 |
| 688130 |
| 690155 |
| 691055 |
| 70879 |
| 7658 |
| 770 |
| 3898543 |
| 3918376 |
| 3926089 |
| BH-1538 |
| C0933 |
| CH757 |
| CH933 |
| E70770 |
| E70879 |
| KM-542 |
| MH0933 |
| MH441 |
| RH326 |
| 26034X |