Oil & Grease Seal Speedi Sleeves - Metric & Inch - Std Speedi-Sleeve Kits
#SKF99298
Sommaire du produit
Our Speedi Sleeves Repair Scored to Restored in a Few Minutes With a Few Easy Steps With No Special Tooling.
Caractéristiques et avantages
Caractéristiques et avantages
SKF99298 - Documents de caractéristiques - A
SKF99298 - Documents de caractéristiques - B
SKF99298 - Documents de caractéristiques - C
SKF99298 - Documents de caractéristiques - D
SKF99298 - Documents de caractéristiques - E
- Although Installation is Simple, it Should be Done Carefully to Achieve the Best Results.
- Before Starting, the Sealing Zone of the Shaft Should be Carefully Cleaned and Any Burrs or Rough Spots Should be Filed Down and Polished.
- Deep Wear Grooves, Scratches or Very Rough Surfaces Should be Treated With a Suitable Powdered Metal Epoxy Filler.
- The Sleeve Must be Positioned on the Shaft Before the Filler Has Hardened.
- It Should Also be Noted that Although Speedi Sleeves Can be Easily Installed Within Minutes on Most Shafts.
- They Should NOT Be Placed Over Splines or Keyways, etc on the Shaft.
- Commonly Used on End Yokes, Input/Output Shafts, Crankshafts, Camshafts, Accessory Drive Shafts, or Wherever Needed to Alleviate Additional Costs and Downtime.
- A Mallet or Rubber Hammer is Commonly Used to Drive the Sleeve on the Shaft With an Enclosed Driver Tool.
- Instructions Included With Most All of Our Speedi Sleeves.
- Manufactured to Meet or Exceed O.E.M. Specifications in Function, Form & Fit.
Spécifications
| Compatible avec le diamètre de l'arbre | 2.990 in. To 2.996 in. / 75.94 mm To 76.10 mm |
| Diamètre de bride | 3-23/64 in (8.53 cm) |
| Épaisseur | 9/16 in (1.42 cm) |
Interchanges et pièces équivalentes:
| 145899298 |
| CR99298 |
| 99298 |
| 992981 |
| 99298CHR |
| 99298RS |
| CHR99298 |
| N99298 |
| ZAR99298 |
| 12328958 |
| 965899298 |
| 27SR3546 |
| 4133546100 |