Oil Pan - New
#SPEGMP08A
Product Overview
Innovative Engineering, Manufacturing Technology And Quality Control Ensure That Spectra Premium Oil Pans Meet Or Exceed The Performance Of The Original Equipment They Replace.
Features & Benefits
Features & Benefits
SPEGMP08A - Features Documents - A
SPEGMP08A - Features Documents - B
SPEGMP08A - Features Documents - C
- Unit Is Designed To OE Fit, Form And Function Requirements Accomplished By Leveraging Our OE Expertise
- Durable Powder Coating Applied To Exterior Of Oil Pan For A Long Lasting Rust Free Unit
- Washed And Then Sealed With An Anti-Corrosive Spray On The Interior For A Rust Free Unit At Installation
- Fit Tested On The Very Same Vehicle Application For Which It Was Developed Verifying First-Hand That The Design Fits Properly And Can Be Easily Installed
- Engineered To Stringent Tolerances Based On Our Canadian Engineers In-Depth Knowledge Of The OE Part It is Designed To Replace
- Road Tested To Ensure Real World Performance And To Verify That Each Design Meets Our High Standards For Quality
- Coating Salt Spray Tested For Over 200 Hours To Insure Durability
- Addition Of Threaded Stainless Steel Inserts In The Aluminum Pans To Increases Product Lifespan By Providing Increased Durability While Maintaining The OE Drain Plug Specifications
Specifications
| À déflecteur | Yes |
| Capacité | 5 QT |
| Couleur | Noir |
| Contient | 1 Classic Engine Oil Pan |
| Chiffon de vilebrequin inclus (O/N) | No |
| Profondeur (po) | 7 7/8 po |
| Profondeur (mm) | 198 mm |
| Orifice de jauge | No |
| Bouchon de vidange inclus (O/N) | Yes |
| Raccord de retour de refroidisseur d'huile de moteur | No |
| Finition | Noir thermoloqué |
| Joints d'étanchéité inclus (O/N) | No |
| Casserole de type exclusion | No |
| Longueur | 21-5/8 po (54,94 cm) |
| Longueur (po) | 21 5/8 in. |
| Longueur (pouces) | 21 5/8 in. |
| Longueur (mm) | 550 mm |
| Matériel | Acier laminé à froid |
| Largeur maximale | 10 in. |
| Nombre de trous de montage | 18 |
| Neuf ou remanufacturé | Neuf |
| Taille de filetage de bouchon de vidange d'huile | M14 x 1.5 |
| Orifice de capteur de niveau d'huile | No |
| Capacité de carter d'huile | 5 QT |
| Matériau de carter d'huile | Cold Rolled Steel (EDDQ) |
| Emballage | Box, Corrugated Or Solid |
| Ramasseur inclus (O/N) | No |
| Application du produit | 77 Buick Century; 78-77 Buick Century; 78 Buick LeSabre; 77 Buick Regal; 79-77 Buick Skylark; 67-65 Chevrolet Bel Air; 68 Chevrolet Bel Air; 69-65 Chevrolet Bel Air; 69-68 Chevrolet Bel Air; 75-69 Chevrolet Bel Air; 70 Chevrolet Bel Air; 75-73 Chevrolet Bel Air |
| Type de carter | Wet |
| Emplacement de carter | Rear |
| Largeur (po) | 10 in. |
| Largeur (mm) | 254 mm |
| Plateau de déviation inclus (O/N) | No |
Interchanges & Equivalent parts:
| 00465221 |
| 358 |
| 465221 |
| 501094 |
| 231B |
| RGMP08A |
| GMP08A |
| 264104 |
| SPIGMP08A |
| TW6400B |
| 103036 |
| KGMP8A |
| 3310023 |
| SK264104 |
| OP37415 |
| IGMP08A |
| 2002140 |
| NOE2002140 |
| 264-104 |
| DOR264104 |
| IGMP08B |