Oil Pan - New
#SPEHOP11A
Sommaire du produit
Innovative Engineering, Manufacturing Technology And Quality Control Ensure That Spectra Premium Oil Pans Meet Or Exceed The Performance Of The Original Equipment They Replace.
Caractéristiques et avantages
Caractéristiques et avantages
SPEHOP11A - Documents de caractéristiques - A
SPEHOP11A - Documents de caractéristiques - B
SPEHOP11A - Documents de caractéristiques - C
- Unit Is Designed To OE Fit, Form And Function Requirements Accomplished By Leveraging Our OE Expertise
- Durable Powder Coating Applied To Exterior Of Oil Pan For A Long Lasting Rust Free Unit
- Washed And Then Sealed With An Anti-Corrosive Spray On The Interior For A Rust Free Unit At Installation
- Fit Tested On The Very Same Vehicle Application For Which It Was Developed Verifying First-Hand That The Design Fits Properly And Can Be Easily Installed
- Engineered To Stringent Tolerances Based On Our Canadian Engineers In-Depth Knowledge Of The OE Part It is Designed To Replace
- Road Tested To Ensure Real World Performance And To Verify That Each Design Meets Our High Standards For Quality
- Coating Salt Spray Tested For Over 200 Hours To Insure Durability
- Addition Of Threaded Stainless Steel Inserts In The Aluminum Pans To Increases Product Lifespan By Providing Increased Durability While Maintaining The OE Drain Plug Specifications
Spécifications
| À déflecteur | No |
| Capacité | 4.4 QT |
| Couleur | Noir |
| Contient | 1 Engine Oil Pan |
| Chiffon de vilebrequin inclus (O/N) | No |
| Profondeur (po) | 5 3/4 po |
| Profondeur (mm) | 145 mm |
| Orifice de jauge | No |
| Bouchon de vidange inclus (O/N) | Yes |
| Raccord de retour de refroidisseur d'huile de moteur | No |
| Finition | Noir thermoloqué |
| Joints d'étanchéité inclus (O/N) | No |
| Casserole de type exclusion | No |
| Longueur | 18-1/8 po (46,05 cm) |
| Longueur (po) | 18 1/8 in. |
| Longueur (pouces) | 18 1/8 in. |
| Longueur (mm) | 460 mm |
| Matériel | Acier laminé à froid |
| Largeur maximale | 10 5/8 in. |
| Nombre de trous de montage | 16 |
| Neuf ou remanufacturé | Neuf |
| Taille de filetage de bouchon de vidange d'huile | M14 x 1.5 |
| Orifice de capteur de niveau d'huile | No |
| Capacité de carter d'huile | 4.4 QT |
| Matériau de carter d'huile | Cold Rolled Steel (EDDQ) |
| Emballage | Box, Corrugated Or Solid |
| Ramasseur inclus (O/N) | No |
| Application du produit | 06-02 Acura RSX; 07-03 Honda Accord; 05-02 Honda Civic; 06-02 Honda CR-V; 11-03 Honda Element |
| Type de carter | Wet |
| Emplacement de carter | Front |
| Largeur (po) | 10 5/8 in. |
| Largeur (mm) | 270 mm |
| Plateau de déviation inclus (O/N) | No |
Interchanges et pièces équivalentes:
| 58685 |
| 11200RAAA00 |
| 552907 |
| 103195 |
| KHOP11A |
| HOP11A |
| 264410 |
| SPIHOP11A |
| 501311 |
| 58738 |
| 1010838 |
| 11200-RAA-A00 |
| 11200PNA000 |
| 11200-PNC-000 |
| 11200-PRB-000 |
| SK264410 |
| OP38107 |
| 3310265 |
| IHOP12A |
| 11200PNLE00 |
| IHOP11A |
| 264-410 |
| DOR264410 |