Ne manquez pas la promotion ACHETEZ EN LIGNE ET GAGNEZ du 15 mai au 15 juin ! Cliquez ici pour participer.
ACHETEZ ET GAGNEZ
Pinion Speedi-Sleeve - Front Axle
#SKF99182
Sommaire du produit
Our Speedi Sleeves Repair Scored to Restored in a Few Minutes With a Few Easy Steps With No Special Tooling.
Caractéristiques et avantages
Caractéristiques et avantages
SKF99182 - Documents de caractéristiques - A
SKF99182 - Documents de caractéristiques - B
SKF99182 - Documents de caractéristiques - C
SKF99182 - Documents de caractéristiques - D
SKF99182 - Documents de caractéristiques - E
- Although Installation is Simple, it Should be Done Carefully to Achieve the Best Results.
- Before Starting, the Sealing Zone of the Shaft Should be Carefully Cleaned and Any Burrs or Rough Spots Should be Filed Down and Polished.
- Deep Wear Grooves, Scratches or Very Rough Surfaces Should be Treated With a Suitable Powdered Metal Epoxy Filler.
- The Sleeve Must be Positioned on the Shaft Before the Filler Has Hardened.
- It Should Also be Noted that Although Speedi Sleeves Can be Easily Installed Within Minutes on Most Shafts.
- They Should NOT Be Placed Over Splines or Keyways, etc on the Shaft.
- Commonly Used on End Yokes, Input/Output Shafts, Crankshafts, Camshafts, Accessory Drive Shafts, or Wherever Needed to Alleviate Additional Costs and Downtime.
- A Mallet or Rubber Hammer is Commonly Used to Drive the Sleeve on the Shaft With an Enclosed Driver Tool.
- Instructions Included With Most All of Our Speedi Sleeves.
- Manufactured to Meet or Exceed O.E.M. Specifications in Function, Form & Fit.
Spécifications
Convient au diamètre d'arbre | 1.687 in. To 1.693 in. / 42.84 mm To 43.00 mm |
Diamètre de bride | 1-29/32 in (4.85 cm) |
Épaisseur | 1/2 in (1.27 cm) |