Molded Coolant Hose, EPDM, L: 11-51/64 in, ID: 2-1/4 in
#GAT21302
Features & Benefits
- Approved for marine applications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25mm (1") ID, SAE 20R4 EC Class D1 for 25mm (1") ID and over
- Specifically engineered materials resist vacuum collapse to reduce the need for internal springs in many applications
- Custom shapes available with minimum order quantity and setup charge
- Recommended for upper, lower, by-pass, heater and other coolant hose applications
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- EPDM tube, synthetic fiber knit reinforcement, heat- and ozone-resistant EPDM cover
Specifications
| Caution | Do not use for fuel or oil transfer applications. |
| Contains Spring | No |
| Inside Diameter 1 (in) | 2-1/4 in (5.72 cm) |
| Inside Diameter 2 (in) | 2-1/4 in (5.72 cm) |
| Length | 11-51/64 in (29.97 cm) |
| Material | EPDM |
| Modular Hose | No |
| Number of Branches | 0 |
| Temperature Range | -40°F @ 275°F (-40°C @ 135°C) |
| Weight | 1.12 lb (0.51 kg) |
Interchanges & Equivalent parts:
| 61051 |
| GYB61051 |
| 1437581 |
| 20959 |
| 379763 |
| 387502 |
| 41051 |
| 60840 |
| 62158 |
| 67156 |
| 70902 |
| 71736 |
| 7696 |
| 20140S |
| 354837C1 |
| 3610324C1 |
| 7C4Z 8260 AA |
| 870982C1 |
| C70902 |
| C71736 |
| CH1302 |
| CH959 |
| D0HA 8260 AM |
| D0HA 8260 M |
| D0HA 8260 Y |
| D0HA 8286 AR |
| D0HE 8260 P |
| D0HZ 8260 L |
| D0HZ 8260 P |
| D0HZ 8286 L |
| D2HA 8260 ABA |
| D2HA 8260 ARA |
| D2HA 8286 AFA |
| D2HA 8286 AR |
| D2HA 8286 TA |
| D7HA 8260 MA |
| D9HZ 8260 AE |
| D9HZ 8260 T |
| D9HZ 8260 W |
| D9HZ 8286 Z |
| E0HT 8286 AKA |
| E0HT 8286 AKB |
| E0HT 8286 ALA |
| E0HT 8286 ALB |
| F1HT 8260 AA |
| F1HT 8260 BA |
| F1HT 8260 EA |
| F1HZ 8260 AA |
| F1HZ 8260 AD |
| F1HZ 8260 D |
| KM-1160 |
| KM-193 |
| KM-284 |
| KM-287 |
| KM-291 |
| KMS-1091 |
| KMS-1093 |
| KMS-1094 |
| MH1302 |
| 0519662000 |
