Hydraulic Hose, ID: 1-3/8 in
#GAT86617
Product Overview
Recommended for Medium Pressure Hydraulic PetroleumûBased Oil Lines in Impulse Applications, Lube Oil, Air & Water in Applications Such as Air Brakes.
Features & Benefits
- DOT FMVSS 106û74 Type AII and SAE J1402 Type AII for Air Brake Applications (Sizes 4 - 12).
- Also For Power Steering (Caution: Intended for Heavy Duty Commercial Vehicle Use Only), Turbocharger Oil Supplies, Tilt Cab Cylinders, Transmission Coolant & Filtration Lines.
- Federal Law Requires Registration w/ the Department of Transportation for Anyone Producing Air Brake Hose Assemblies w/ Swaged or Crimped Fittings.
- Temperature Range: Under SAE 100R5 (Hydraulic) Conditions: -40 Deg F - +212 Deg F (-40 Deg C - +100 Deg C). AllûPurpose Fleet Application (Hot Lube Oil Lines): -40 Deg F - +300░F (-40 Deg C - +149 Deg C).
- For Air: to +160 Deg F (+71 Deg C) only. Avoid Continuous Use at Maximum Temperature Concurrent w/ Maximum Working Pressures.
- Recommended Couplings: C5 Field Attachable, C5X Field Attachable (Sizes 5, 8 & 12), MegaCrimp & GlobalSpiral. Please See Gates Ecrimp for Correct Fitting Recommendation.
- Meets or Exceeds Requirements of SAE 100R5 for Traditional Hydraulic Applications. Not Recommended for Gasoline or Diesel Fuel.
Specifications
| Couleur | Black |
| Recommandation d'accouplement | C5 Field Attachable |
| Matériau du couvercle | Black Polyester Braid |
| Type de housse | Oil & Mildew Resistant |
| Dash Size | 20 |
| DOT approuvé | No |
| Matériau du tube intérieur du tuyau | Nitrile |
| Description industrielle | 20C5CX25FT |
| Diam. intérieur 1 (po) | 1-3/8 po (3,51 cm) |
| Longueur | 50 ft (15,24 m) |
| Pression maximale | 625 psi (43.09 bar) |
| Pression minimale d'éclatement (PSI) | 2500 psi (172.37 bar) |
| Diamètre extérieur | 1-1/2 in (3.81 cm) |
| Pression | 625 psi (43.09 bar) |
| Type de produit | C5C Hydraulic Hose - SAE 100R5 |
| Rayon | 9 in (22.86 cm) |
| Renforcement | One Braid of High-Tensile Carbon Steel Wire Over One Braid of Polyester |
| Séries d'embouts de tuyau utilisés | Permanent Crimp And "Field Attachable C5" Series Fittings |
| Standard | SAE 100R5 |
| Tube Description | Black, Oil & Heat Resistant Synthetic Rubber |
| Type | Moyenne pression |
Interchanges & Equivalent parts:
| GR520X50 |
| GR520X50BX |
| H06920 |
| H16620 |
| 010820 |
| 10820 |
| 86617 |
| 20C5CX25FT |
| 9X2369 |
| 9X2378 |
| SR520 |
| Y920 |
| 150320 |
| 04030385 |
| 36581772 |